KUBOTA 85 L245 4WD 3PT PROB
BUBBA
Join Date: Posts: 1 |
1999-02-25 1323
3PT WON'T LIFT LOADED BUT WILL UNLOADED ALL OTHER HYD. WORK FINELOOKING FOR SERVICE MANUAL, WILL REPAIR MYSELF BUT WOULD LIKE TO HAVE IDEA OF STARTING POINT AND ALSO DOWN TIME FOR PARTS
Reply to | Quote Reply | Add Photo
KUBOTA 85 L245 4WD 3PT PROB
scott Sebring
Join Date: Posts: 1 |
1999-02-27 1366
Suggest doing the simple stuff first: after making sure you have tractor hydraulic fluid in your trans.( and nothing heavier) locate the internal "final filter" located on the lower left side of the trans. housing.It lurks underneath a cap held down with two bolts. The cap is about 3 1/2" across as I recall. Be aware that as you loosen the cap, it is under slight spring tension, and you will lose great amounts of oil. After you work the cylinder shaped metel screen filter out of its cavity, you will need to remove the paraffin build-up (it may not be noticable) with a propane hand held torch. This wax build-up prevents 3 pt. efficiency. Hope this helps. Feel free to e-mail me if I can help further.ntyou need anything ....
Reply to | Quote Reply | Add Photo
KUBOTA 85 L245 4WD 3PT PROB
georgette milller us
Join Date: Posts: 1 |
1999-06-06 4776
need information. where to buy in usa. pittsburg n.h.or nearest. cylinder 2inches 3/8 .. rod one inch ..stroke 16 inches.can you give price approx. thank you ....
Reply to | Quote Reply | Add Photo
KUBOTA 85 L245 4WD 3PT PROB
georgette miller
Join Date: Posts: 1 |
1999-06-06 4778
cylinder 2-3/8 inches by 1 inch. by 16 inches longwhere to buy cylinder in pittsburg area us or nearestand price if available and phone numberthankg miller ....
Reply to | Quote Reply | Add Photo
Go Top
Share This